D5V0F4U10MR document number: ds36285 rev. 1 - 2 1 of 4 www.diodes.com september 2013 ? diodes incorporated d5 v 0f4u10mr 4 channel low capacitance tvs diode array features ? iec 61000-4-2 (esd): air ? 15kv, contact ? 8kv ? 4 channels of esd protection ? low channel input capacitance of 0.5pf typical ? typically used at high speed ports such as usb 2.0, usb 3.0, ieee1394, serial ata, dvi, hdmi, pci ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) mechanical data ? case: msop-10 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: matte tin finish annealed over copper leadframe (lead free plating). solderable per mil-std-202, method 208 ? weight: 0.026 grams (approximate) ordering information (note 4) product compliance marking reel size (inches) tape width (mm) quantity per reel D5V0F4U10MR-13 standard uv3 13 12 2,500/tape & reel notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html. marking information pin # description 1, 4, 6, 9 inputs 2, 5, 7, 10 no connection 8 v n , ground 3 vp, power pin description device schematic uv3 = product type marking code yyww = date code marking yy = last two digits of year (ex: 13 = 2013) ww = week code (01 ~ 53) to p view msop-10 10 9 7 6 8 2 4 5 3 1 ch1 nc v dd ch2 nc nc ch4 gnd nc ch3 uv3 yyww
D5V0F4U10MR document number: ds36285 rev. 1 - 2 2 of 4 www.diodes.com september 2013 ? diodes incorporated d5 v 0f4u10mr maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit conditions peak pulse current i pp 3 a 8/20s, per figure 3 esd protection ? contact discharge v esd_contact 8 kv standard iec 61000-4-2 esd protection ? air discharge v esd_air 15 kv standard iec 61000-4-2 thermal characteristics characteristic symbol value unit power dissipation (note 5) p d 500 mw thermal resistance, junction to ambient (note 5) r ? ja 250 c/w operating and storage temperature range t j , t stg -65 to +150 c electrical characteristics (@t a = +25c unless otherwise specified) characteristic symbol min typ max unit test conditions reverse working voltage v rwm ? ? 5.5 v ? reverse current (note 6) i r ? ? 200 na v r = 5.5v reverse breakdown voltage v br 6.0 ? ? v i r = 1ma reverse clamping voltage, positive transients (note 7) v cl ? 10 12 v i pp = 1a, t p = 8/20 s dynamic resistance r dyn ? 1.0 ? ? i r = 1a, t p = 8/20 s capacitance (note 8) c t ? 0.4 0.65 pf v r = 2.5v, f = 1mhz ? 0.5 ? pf v r = 0v, f = 1mhz notes: 5. device mounted on fr-4 pcb pad layout (2oz copper) as shown on diodes, inc. suggeste d pad layout ap02001, which can b e found on our website at http://www.diodes.com. 6. short duration pulse test used to minimize self-heating effect. 7. clamping voltage value is bas ed on an 8x20s peak pulse current (i pp ) waveform. 8. measured from any ch to gnd. 9. for information on the impact of diodes' usb 2.0 compatib le esd protectors on signal integrity including eye diagram plots, please refer to an77 at the following url: http://www.d iodes.com/destool s/appnote_dnote.html. 0125175 150 100 0 t , ambient temperature ( c) figure 1 power derating curve a p , p o we r dissi p a t i o n (mw) d 25 100 50 75 150 50 300 note 5 200 250 350 400 450 500 550 600 0 50 25 50 75 100 125 150 p eak p u lse de r a t in g % o f peak power or current t , ambient temperature (c) figure 2 pulse derating curve a 0 100 25 75 175 200
D5V0F4U10MR document number: ds36285 rev. 1 - 2 3 of 4 www.diodes.com september 2013 ? diodes incorporated d5 v 0f4u10mr package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. 0 t, time ( s) figure 3 pulse waveform ? 20 40 60 100 50 0 peak value i pp half value i /2 pp 8x20 waveform as defined by r.e.a. i , peak pulse current (%i ) ppp p 0.1 1 10 100 1000 300 500 700 900 1100 figure 4 typical forward characteristics v , instantaneous forward voltage (v) f i , instantaneous forward current (ma) f t = 25c a t = 85c a t = 125c a t = 150c a t = -55c a 0.1 1 10 100 0123456 i , leaka g e c u r r e n t (na) r figure 5 typical reverse characteristics v , reverse voltage (v) r t = 25c a t = 85c a t = 125c a t = 150c a t = -55c a 0.4 0.45 0.5 0.55 0.6 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 figure 6 total capacitance vs. reverse voltage v , reverse voltage (v) r c , total capacitance (pf) t f = 1mhz msop-10 dim min max typ a 0 ? 8 4 a - 1.10 - a1 0.05 0.15 0.10 a2 0.75 0.95 0.86 a3 0.29 0.49 0.39 b 0.17 0.33 0.20 c 0.08 0.23 0.15 d 2.90 3.10 3.00 e - - 0.50 e 4.70 5.10 4.90 e1 2.90 3.10 3.00 e3 2.85 3.05 2.95 l 0.40 0.80 0.60 all dimensions in mm l gauge plane detail a b a2 a1 c detail a e e d a a a3 e1 e3 note 8
D5V0F4U10MR document number: ds36285 rev. 1 - 2 4 of 4 www.diodes.com september 2013 ? diodes incorporated d5 v 0f4u10mr suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2013, diodes incorporated www.diodes.com dimensions value (in mm) c 5.300 x 0.300 y 1.350 y1 0.500 x y y1 c
|
